How to replace a PAR56 pool light bulb ?

There are many reasons in daily life that can cause underwater pool lights to not work properly. For example, the pool light constant current driver does not work, which may cause the LED pool light to dim. At this time, you can replace the pool light current driver to solve the problem. If most of the LED chips in the pool light burn out, you will need to replace the pool light bulb with a new one or replace the entire pool light. In this article, we will tell you how to replace a broken PAR56 pool light bulb.

1. Confirm whether the purchased pool light can be replaced by the old model

There are many kinds of LED pool lights, and the products of different companies are different. Such as PAR56 pool light material, power, voltage, RGB control mode and so on. Purchase pool light bulbs to ensure they are consistent with existing parameters.

2. Prepare

Before you are ready to replace the pool light, prepare the tools needed to replace the pool light bulb. Screwdrivers, test pens, light bulbs that need to be replaced, etc.

3. Turn off the power

Find the pool power supply on the power distribution box. After turning off the power, try turning on the light again to confirm that the power is off. If you can’t find a pool power source, the safest thing to do is turn off the main power source in your home. Then repeat the above method to confirm that the pool power is turned off.

4. Remove pool lights

Embedded pool light, you can unscrew the pool light, gently pry out the light, and then slowly pull the light to the ground for follow-up work.

5. Replace pool lights

The next step is to turn the screws. First confirm that the screw on the lampshade is cruciform, or a zigzag. After confirming, find the corresponding screwdriver, remove the screw on the lampshade, put it in a safe place, remove the lampshade, and then screw on the screw.

If the lamp has dirty things to clean up in time, the use of a long time pool light may appear internal water corrosion, if the corrosion is serious, even if we replace the pool light bulb, it may be damaged in a short time, in this case it is best to replace a new pool light and a new pool light.

6. Put the pool lights back in the pool

After replacing the pool light, install the shade and re-tighten the screws. Recessed pool lights require the wire to be wound in a circle, put back into the groove, secured and tightened.

After completing all of the above steps, turn the power back on and check to see if the pool lights are working properly. If the pool light works properly and is put into use, then our pool light bulb replacement is complete.

Heguang Lighting is a professional manufacturer of LED pool lights. All our pool lights are IP68 rated. Available in a variety of sizes, materials and powers. Whether you need pool lighting products or want to solve pool light related problems, please feel free to contact us.